66
CHAPTER 3
®
3.4.3.2. Model update by Maxi Programmer
The update of the model present in the Base board can be carried out by using the Maxi Program-
mer too. Connect the "Maxi Programmer harness for TP606 ccTalk and PROFIT Validator" to the
J4
connector of the Aeterna Base board. Switch on the Maxi Programmer, choose the update to be
carried out and press the START key.
For further information see the documentation supplied with the Maxi Programmer.
3.5. Executive communication between PC and Coin
Mechanism
3.5.1. Management of Executive protocol to PC
The connection between
PC
(COM port)
and Coin Mechanism
(9-ways Molex connector) occurs by
means of the EXE-RS232 Interface for Systems and Change-giver. The proper libraries of command
implementation of the Executive protocol to PC are available on request by contacting Coges
Customer Service (see para. 1.4.5. “EXE-RS232 Interface for Systems and Change-giver”).
3.5.2. Codes necessary for starting
The functions described in the table here below are set with default data at purchase time.
Each of these functions must be checked and customized with suitable values.
PROGRAMMING
REFERENCE CODE
Decimal point
5 Account Param. (5.4 = Decimals)
Base Step
5 Account Param. (5.5 = Base Step)
Single sale
or multisale
6 Running Mode (6.5.1 = Key Sale 6.5.2 = Cash Sale)
Price setting
8 Price Setup (only if 6.2 = Price Holding or Cost by Price)
