58
CHAPTER 3
®
By using the
F
key of the Coin Mechanism it is possible to select the widening of the
left
side
[X-]
, of the
right
side
[-X]
or of
both sides [XX]
and then to set the widening percentage
(ex.
+05%).
<
Select the type of widening you intend to perform by using the
F
key;
set the security margin (+00%) by using the
<<->>
keys;
press the
Enter
key to
confirm the data and exit from the menu item.
13.1-60.3 Destination
It permits to change the coin destination (tubes or cash).
Usually the change of a coin destination occurs when the tube configuration in the box has
been changed, which requires a series of operations to be performed. The change of
configuration concerns both the mechanics, with the check and the replacement of the
interested forks and tubes (see para. “Configuration of the tube box”), and some
programming operations.
Generally the coin destination can be of 3 types:
•
cash destination (
);
•
tube destination (T XXXXX);
•
reject destination (
).
Each coin can be assigned to more tubes. The programming menu foresees all the possible
combinations for assigning the coin only to a tube (from T 1 to T 5), for two tubes (ex. T
15), for three tubes (choice of the three tubes with the same value ex. 135), for four tubes
(ex. T 1345) up to a maximum of five tubes with the same value (ex. T 12345).
If next to the destination tube is automatically displayed a closed lock (
), it means that the
tube has already been used for the destination of other coins.
Example of destination change
The Aeterna Coin Mechanism configuration is the following: "0.05 €/ 0.10 €/ 0.20 €/ 0.50 €/
0.05 €". All the just listed values are destined to the Coin Mechanism tubes, the 1.00 € and
2.00 € coins, instead, are destined to the cash. If you intend to replace the 0.05 € tube in the
first position with a 1.00 € tube, follow these instructions:
a)
Replace the mechanical parts by following the instructions described in chapter 2 (see
para. “Configuration of the tube box”);
b)
Change the destination of 0.05 € coin (coin 3 of the model) from T 15 (tube 1 and tube 5)
to T 5;
c)
Change the destination of 1.00 € coin (coin 7 of the model) and set the T 1 (tube 1);
d)
Make the tube loading following the “1.3 Manual Recharge” mode.
If the change operation of the coin destination is carried out in more coin mechanisms it
may be better to carry out a programming with EasyCoinProfit (see the on-line help of
the software at para. "Models File").
13.1-60.4 Set Value
It permits to change the value of the present coin. Usually the data is changed when it is a
customized token which can have a variable value.
a
b
c
Coin Security
+00% [--]
Destination
T 15
Destination
T 5
