manualshive.com logo in svg

COGES Aeterna, Руководство по эксплуатации и инструкция

Поделиться
Скачать
COGES Aeterna Скачать руководство пользователя страница 64

64

CHAPTER 3

®

By removing the harness on the display of the Coin Mechanism is shown the message:

3.4.  Firmware update

To carry out the operations of firmware update, it is necessary to switch off the Coin Mechanism and 
unhook the Validator by acting on the fastening clip (see para. 2.1.3. “Installation modes”) and 
disconnect it from the Base Board.

3.4.1.  Firmware update of the Base board by PC

In the Aeterna Coin Mechanism the firmware update occurs by means of portable or palmtop PC 
connected to the 

J4

 connector of the Aeterna Base board (see para. 1.3.4. “Base board”). The 

software used is 

FlashManager

, which is available at our website: www.coges.eu at page 

Technical support\Download\Software. Connect the special interface (see para. 1.4.6.2. “PC 
programming interface for systems/validators”) to the J4 connector of the Base board. 
Start FlashManager and select the file of the new firmware release. Choose the correct serial 
port and start the update by clicking on the proper icon. The operation in progress is confirmed 
by the lighting up of the orange LED (DL1) on the base board. Wait that the operation is ended. 
The orange LED is switched off.

3.4.1.1.  Firmware update of the Base board by Maxi Programmer

In the Aeterna Coin Mechanism the firmware update can be carried out by means of the Maxi 
Programmer too. Connect the "Maxi Programmer harness for TP606 ccTalk and PROFIT Validator" 
to the 

J4

 connector of the Aeterna Base board. Switch on the Maxi Programmer, choose the 

update to be carried out and press the START key. 
For further information see the documentation supplied with the Maxi Programmer.

     CASH
     NO.    PRICE
  1 ! 00000 ! 059,99
  2 ! 00000 ! 059,99
  3 ! 00000 ! 059,99
  4 ! 00000 ! 059,99
  5 ! 00000 ! 059,99
  6 ! 00000 ! 059,99
  7 ! 00000 ! 059,99
  8 ! 00000 ! 059,99
  9 ! 00000 ! 059,99
 10 ! 00000 ! 059,99

     WITH KEY
     NO.    PRICE
  1 ! 00000 ! 059,99
  2 ! 00000 ! 059,99
  3 ! 00000 ! 059,99
  4 ! 00000 ! 059,99
  5 ! 00000 ! 059,99
  6 ! 00000 ! 059,99
  7 ! 00000 ! 059,99
  8 ! 00000 ! 059,99
  9 ! 00000 ! 059,99
 10 ! 00000 ! 059,99

End
End

Содержание Aeterna











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды