60
CHAPTER 3
®
Token management
Manual programming
The manual programming of the token is carried out completely by using the keypad of
the Aeterna Coin Mechanism in the following way:
Programming by software
The programming of token by means of a software foresees the following operations:
13.1-60.10 Fake
This menu item is used to identify possible fakes programmed in the model and can be
referred to coins or tokens. With the YES option the coin destination is automatically
programmed as reject (
). With the NO option the token or the coin could be addressed to
the cash (
) or to the tubes (T X) only if in the destination the reject is not foreseen and if
the value is set at zero. The preset data (YES/NO) depends on the programmed model.
13.1-60.11 Security Level
This menu item displays the Security level, that is the quantity of coins
which always remain
inside each tube
to guarantee the correct positioning of the coins at entry and a correct
delivery of the coins at exit. The value is already programmed inside the coin model and
cannot be changed.
13.1-60.12 Overflow Level
The menu item displays the maximum number of coins which shall be inside the tube. The
value is already programmed inside the model and cannot be changed. To limit the number of
coins inside the tube it is necessary to change the data set in the “12.8-12.1 Maximum Limit”
menu item.
13.1-60.13 Minimum Photocell
The menu item displays the maximum number of coins which can be inserted inside the Coin
1) Token programming
Carry out the token acquisition by using the “13.1-
60.6 Acquire” menu.
2) Set value
Set the value of the token in the “13.1-60.4 Set
Value” menu.
3) Define token
Define the management of the coin acquired as
token in the “13.1-60.9 Token” menu.
4) Token destination
Confirm the token destination into the cash in the
“13.1-60.3 Destination” menu. As an alternative the
token can be given back to the user.
5) Exact amount (optional)
The sale by token operates in condition of "Exact
Amount" too, see “6.6.7 Sale at Exact Amount”
menu.
1) Token programming
Carry out the token acquisition by using the
EasyCoinProfit software.
2) Value and definition
Set the value and the token management with the
special flags.
3) Create model
Select an already existing model, with the same tube
configuration and make the copy. Add the acquired
token and set as destination cash or reject. Save the
model.
4) Model update
Update the model of the Coin Mechanism according
to what defined in the para. “Model update by PC”.
