Coemar Infinity Spot XL, Инструкция по эксплуатации

Страница: 4 / 29

English
6
Congratulations on having purchased a Coemar product. You have assured yourself of a fixture of the highest quality, both in the
componentry and in the technology used. We renew our invitation to you to complete the service information form on the previous
page. This will assist in providing prompt and accurate advice from your Coemar service centre, which you can thoroughly trust and
to which you can submit any requests for service or information.
Following the instructions and procedures outlined in this manual will ensure the maximum efficiency of this product for years to
come
.
1. Packaging and transportation
1.1 Packaging
Open the packaging and make sure that no part of the equipment has suffered any damage during the transportation. In case of
damage to the fixture, contact your currier and your supplier immediately by telephone, fax or email, and inform them you will
formally notify them in writing through registered letter.
Packing list
Make sure the packaging contains:
1. the
Infinity Spot XL projector.
2. the instruction manual.
3. two (2) cam-lock support brackets.
1.2 Transportation
The Infinity Spot XL must be transported exclusively in its original packaging or in an appropriate flight case.
2. General Information
Fire prevention:
1. Infinity Spot XL utilises a Philips MSR GOLD 1500 FastFit; the use of any alternative lamp might be risky and will make the
warranty of the fixture null and void.
2. Never locate the fixture on any flammable surface.
3. Minimum distance from flammable materials: 2 m.
4. Minimum distance from the closest illuminable surface: 2 m.
5. Replace any blown or damaged fuses only with identical ones, both in size and value. Refer to the connection diagram if there is
any doubt.
6. Connect the projector to mains power protected by a thermal magnetic circuit breaker.
Preventing electric shock:
1. Presence of high voltage inside of the fixture. Insulate the projector from mains supply before opening or performing any function
which involves touching the inside of the fixture, including lamp replacement.
2. For the connection to the mains, adhere strictly to the guidelines outlined in this manual.
3. The level of technology of
Infinity Spot XL requires the use of specialised personnel for all service applications; refer all work to
your authorised Coemar service centre.
4. A good earth connection is essential for the proper functioning of the projector. Never connect the fixture if there is no earth
connection.
5. Mains cables must not come into contact with other cables.
6. Do not operate the projector with wet hands or in an area where water is present.
7. The fixture must never be located in an exposed position, or in areas of extreme humidity.
Protection against ultraviolet radiation:
1. Never turn on the lamp if any of the lenses, filters, or the plastic housing are damaged; their shielding functions will only operate
efficiently if they are in perfect working order.
2. Never look directly in the direction of the lamp when it is operating.
Safety:
1. The projector must always be installed with bolts, clamps, or other fixing devices which are suitably rated to support the weight of
the projector.
2. Always use a secondary safety fixing device with chain or steel wire of a suitable rating to sustain the weight of the unit in case of
failure of the principal fixing point.
3. The external surfaces of the unit, at various points, may reach 150°C. Never handle the unit until at least 10 minutes have
elapsed since the lamp was turned off.
4. Always replace the lamp if any physical damage is evident.
5. Never install the fixture in an enclosed area lacking sufficient air flow; the room temperature must not exceed 35°C.