Coemar Infinity Spot XL, Инструкция по эксплуатации

Страница: 17 / 29

English
19
8.4 Measures
The electronic boards of Infinity Spot XL allow to perform self-diagnostics digital measures.
MEASURES
TEMPERATURE
VOLTAGE
DMX INPUT
MEASURE
DMX RATE
ALARM STATUS
LAMP STATUS
USAGE HOURS
SOFTWARE
VERSION
Displays the temperatures of the areas inside the base.
Displays the main power voltage (in Volt) of the fans; any
measurements exceeding 25,8V are not deemed normal.
Displays the DMX value (0-255) received from each
channel used by the projector on the DMX line.
Reading of the typical value of DMX512 signal, called
RATE (signal updating frequency in milliseconds)
List of any error messages.
Displays lamp status, if it is ON and if the "zap" effect is
enabled.
Displays the following odometers:
-LAMP LIFE (r) = lamp life (resettable).
-LAMP LIFE= total life of all lamps (not resettable).
-UNIT LIFE= projector life.
Displays the currently installed software version (this
information is also displayed at the projector start up)
8.5 Display setup
The Display setup allows to tune functioning of the Infinity Spot XL display functions according to your needs. The following
diagram shows the section features.
DISPLAY
REVERSE
BACKGROUND
COLOUR
DISPLAY
TIMEOUT
BUTTON TIME
OUT
BRIGHTNESS
-STANDARD
-REVERSE
-STANDARD
-REVERSE
-OFF
-
n seconds (+/-)
-OFF
-
n seconds (+/-)
-1 ~100% (+/-)
Allows to set the display brightness.
Allows to view the positive or negative display graphiocs.
Allows to set the switching off time (in seconds) of the display backlightin
case of prolonged inactivity. The OFF value always keeps the display ON.
Allows to set how many seconds the button must be pressed to activate the
functions; this avoids activating the functions when the buttons are
accidentally pressed.
Allows to rotate of 180 the display graphics in case of reverse installation.
DISPLAY SETUP