Coemar Infinity Spot XL, Инструкция по эксплуатации

Страница: 14 / 29

English
16
8. Display panel functions
By suitably using all the functions of Infinity Spot XL which can be activated through its display panel, it is possible to change
some of the parameters and to add some functions.
Changing the preset settings made by Coemar can vary the functions of the projector so that it will respond differently to the
controller; therefore carefully read about the functions described hereunder before carrying out any possible selection
.
8.1 Quick guide to menu.
In order to access the functions, just press the menu button: the screen you see hereunder, divided into four sections, will appear;
the sections will be shown cyclically, one by one, every time the + or
– button is pressed. To select the desired function, press
“enter”.
8.1 Rapid count
It is possible to rapidly change the various numbers displayed for the different functions in the following 3 manners:
1. Pressing the + or
– buttons will cause the count to be quicker.
2. Pressing first + and then
– and then holding them down simultaneously will cause the numbers to jump to the highest value.
3. Pressing first
– and then + and then holding them down simultaneously will cause the numbers to jump to the lowest value.
DISPLAY
SETUP
MAIN
FUNCTIONS
MEASURES DEMO
MAIN FUNCTIONS -
groups the main setup
functions of the fixture: pan/tilt management, lamp
management, fans management, reset, motors test, ID
code, back to original
settings and access to “SPECIAL
MODE
“.
DISPLAY SETUP -
allows the management of the
display: brightness, positive or negative graphic
appearance, backlight shutdown time, button shutdown
time, 180° display rotation.
DEMO -
allows the performing of the demonstration
program. 4 different demo programs are available
.
MEASURES -
allows the reading of all functional
settings of the fixture: temperatures, fans power, DMX
channels values, diagnostics, lamp status and life and
diagnostic version of the installed software.
to.