1.1
Installation Instructions for
Cosmo 12/18 Wall
700OWCOS_
1
920OWCOSMO
G
P
I
:
ENERAL RODUCT NFORMATION
These fixtures are intended to be installed
utilizing
compliant junction boxes.
NEC
This product may be dimmed with a low-voltage electronic
dimmer or a 0-10V dimmer depending on the wiring
configuration.
Suitable for wet locations.
Install the Fixture
1A
2
1
CAUTION RISK OF FIRE
-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
With the provided Allen wrench, remove the two
mounting plate screws.
Remove the mounting plate from the back of the
fixture.
FIXTURE
SCREW
1
MOUNTING
PLATE
1
ALLEN
WRENCH
OUTDOOR
3
ELECTRICAL BOX
Install the mounting plate onto the electrical box with
the two #8-32 screws provided.
#8-32 SCREW
3
1B
3
#8-32 SCREW