Coemar Infinity Spot XL, Инструкция по эксплуатации

Страница: 26 / 29

English
28
10.7 How to remove the colour changer assembly.
Unscrew the four lateral locking screws
“G” of the assembly and remove it carefully. When repositioning the assembly, make sure
to insert it correctly into the specific lateral guides.
11. Maintenance
11.1 Periodic cleaning
Lenses and filters
Even a fine layer of dust can substantially reduce the luminous output and alter the compactness of the beam. Regularly clean all
filters and lenses using a soft cotton cloth, dampened with a specific lens cleaning solution.
Fans and air passages
The fans and air passages must be cleaned approximately every 6 weeks; the length of the period between each cleaning will
depend, of course, upon the conditions in which the projector is operating. Suitable instruments for performing this type of
maintenance are a brush and a common vacuum cleaner or an air compressor.
If necessary, do not hesitate to carry this out even after a shorter period of time.
11.2 Periodic maintenance
Lamp
Check the lamp and replace it if there is any observable damage or deformation or if or if the time limit is close (check the
resettable counter).
Mechanical parts
Periodically check the movement of all mechanical devices, and check driving belts, gears and lens guides. Replace them if
necessary. Make sure the projector is not mechanically damaged. If necessary, replace the worn parts. Check the tension of the
belts and adjust them if necessary.
Electrical components
Check all electrical connections, in particular for correct earthing and correct attachment of all extractable connectors. Press the
connectors if necessary and reposition as before.
11.3 Fuse replacement
Check the conditions of the fuses using an appropriate instrument; if damaged, replace them with equivalent ones.
G
G