Coemar i spot FLEX, Инструкция по эксплуатации

Страница: 15 / 40

15
DMX accessories
Fig. W8 below shows a system including Flex fixtures, console, coemar dr2 and coemar bidos bi-directional DMX opto-split-
ter. Flex fixtures utilize the newest standards for bi-directional communication between the fixture, the console (when RDM
enabled) and dr2 . Using the dr2 the operator can view and set all the parameters of the lighting fixture previously discussed from
the convenience of the console location without having to access the fixture. This includes addressing, changing menu features,
monitoring temperatures, etc., all from the convenience of the console. The
dr2 should be installed in the DMX line at the front
end, preferably adjacent to the console to allow for easy access. In the event that more than 100m of data cable or 24 fixtures
are utilized on the DMX data line, a bi-directional splitter/repeater such as the
coemar bidos should be inserted in the line imme-
diately after the 24 th fixture or 100m of data cable. Following proper wiring practices will insure you trouble free performance of
your new Flex products.
Figure W8 Fixture – console- bidos Bidirectional Opto Splitter – dr2 interconnect
DMX data present
Your Flex fixture allows you to confirm the presence of DMX data as well as the DMX level of each channel and the data rate.
The DATA LED on the display will light when DMX is present. Data analysis can be performed through the
MEAS
/
DMIN
and the
MEAS
/
RATE
menus. See the Functions section for details on using the DMX analysis features of your Flex .
Figure W9 Detail of display with DMX LED identified
function display /
fu nct io n d isp la y
menu enter
men
u
ent
er
+
+
–
–
A 0 0 1
m
ore
m
ore
in
Controller
DMX 512
OUT
3
2
1
4
5
Connect to other
DMX 5 1 2 devices
in
out
in
out
in/
out 1
in (A)
DR2
Connect to other DMX 5 1 2 devices
5 pin XLR 5 / M
5 pin XLR 5 / F
power in (A) thru out 1 out 2 out 3/ in (B) out 4 out 5
data
conflict
data data
thru
data data data data dip sw.
error
data
F 500 mA
A Zone
B Zone
transm. power ON
dip sw. ON A zone B zone
1
2
Unidirectional Unidirectional
3 Unidirectional Bidirectional
4 Bidirectional Bidirectional
8
all off
Off
Unidirectional
Bidirectional
5 120 Ω disconnected on THRU
DMX 512 HUB rack
in/
out 2
in/
out 3
in/
out 4
in/
out 5
out