![Coemar i spot FLEX Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/coemar/i-spot-flex/i-spot-flex_instruction-manual_2634373013.webp)
6.2.2.Fitting Clamps
When installing the fixture always use clamps or fasteners that are designed
for this purpose and rated for at least
10X
the weight of the fixture. This fixture
is a dynamic load and must be
RIGIDLY
mounted. All fasteners used to secure
the fixture should be fitted with lock washers and nuts or flat washers with lock-
ing nuts to insure that the fasteners cannot work loose. Insure that the fixture
has freedom to move without encountering any obstruction.
Figure W5 showing clamps fitted
6.2.3.Fitting Safety Cables
Safety cables should always be used in conjunction with proper rigging means
to insure safety. The safety cable(s) should be fitted to the safety cable points
provided on the base of the
Flex
and then to a secure structural member. The
safety cable(s) and securing points should be capable of supporting
10 X
the
weight of the fixture.
Figure W6 showing safety cables fitted
6.2.4. Secure power and data cabling
Data, power and safety cables should be dressed such that no wires are adjacent to the fixtures moving parts or might
become entangled in the fixture when moving. Avoid running wiring adjacent to hot areas of the fixture.
6.2.5. Flammable materials
The fixture produces intense heat both within the fixture and through the light beam produced by the fixture. Keep the
fixture away from any flammable materials and surfaces and never aim the light beam at a flammable surface less than
2 meters from the fixture. Never block the lens of the fixture. Never block the air intakes or exhaust in the fixture base
or head.
Flex
includes thermal safety means that will shut the fixture down in the event of overheating. Proper cooling
will result in better performance and longer lamp life. The fixture environment should be kept clean and ambient tem-
peratures should not exceed 35°C (91°F).
6.2.6. Mounting Location:
The fixture should only be mounted where it cannot be touched or bumped and where it is protected from rain and
moisture.
13
Содержание i spot FLEX
