Coemar i spot FLEX, Инструкция по эксплуатации

Страница: 35 / 40

Now proceed with the assignment of 4 motors pcb in the bus 4
9) <menu>
SAB2
Back to the assignment of
serial bus 2
10) <+>
SAB4
To assign serial bus 4
(4 motors pcb)
11) <enter>
01B4
The display shows 01B4
(pcb address 1, 4 motors
bus)
12)Press the key B of the pcb to
address as number 1 in the
system.
Refer to the electronic pcb
address map to identify the
position of the pcb .
The led A stops flashing for
few seconds, the PCB is
addressed.
13) <+>
02B4
The display shows 02B4
(pcb address 2, 4 motors
bus)
14)Repeat step 12 to address pcb
2 of serial bus 4
The led A stops flashing for
few seconds, the PCB
is addressed.
15)Repeat step 12 and 13 to
address pcb 3. 4, 5, 6, 7 and 8
of the serial bus 4.
03B4
04B4
05B4
06B4
07B4
08B4
The 4 motors serial bus is fully assigned.
16)Press and keep pressed
<more> at the same time as
<menu>
A001
The fixture now is back to
its standard mode, the dis-
play shows the address
DMX, for example A001
15