Coemar i spot FLEX, Инструкция по эксплуатации

Страница: 17 / 40

17
7.3. Accessing the internal components
Removing covers
To access the internal components in the head of the Flex remove the top cover. The top cover is the one with the lamp exhaust
fins over the lamp housing. Remove the cover by unscrewing the four retaining screws.
Figure W12A Removing Fixture Covers Figure W12B Removing Fixture Covers
To access the PCB’s located in the yoke remove the four screws retaining the covers and pull the covers upward and out. You
now have access to all 4 motor PCBs.
Figure W13A Removing Yoke Covers W13B Removing Yoke Covers
To access the base remove the four screws retaining the covers and pull the covers upward and out. You now have access to all
major components.