Coemar i spot FLEX, Инструкция по эксплуатации

Страница: 18 / 40

18
7.4. Changing Colors, Gobos and Prisms
Refer to the Additional Technical
Information Section 6 for a chart of
standard fitted colors.
The
i
SPOT
Flex
is fitted with three
removable modules to provide easy
access to the colors and gobos. The
module closest to the lamp housing is the
CYM+CTO+Dim module. The second
module is the Color+Gobo module which
includes the two fixed color wheels and
the first two rotating gobo wheels.
The third module includes the Iris
module.
Figure W14: Module Locations
Changing Fixed Colors
Remove the top cover of the fixture and locate the Color+Gobo module as in Figures
W12. Turn the two quarter turn fasteners one quarter turn counter-clockwise, then
grasp the module by the metal frame and pull it straight out from the fixture. Lay the
module on a work surface with the color wheels up.
DO NOT lay the module on the
color wheels. Each of the color wheels is fitted with 4 removable color filters.
Remove the color wheels from the module as follows:
1) Remove the sensor assembly (A) by removing the 2 retaining screws and setting
the sensor assembly aside.
2) Remove the #1 Phillips screw at the center of the color wheel shaft.
Figure W15A: Removing Sensor
Figure W15B: Loosen Screws on Color Wheel
3) Gently pull the first color wheel upward and over the shaft, removing the belt, and set it aside.
4) Gently pull the second color wheel upward and over the shaft, removing the belt, and set it aside.
5) Loosen the #1 Phillips screws on the center hub by one turn and pull the selected color outward to remove it.
Figure W15C: Loosening Color Wheel Screws Figure W15D: Removing Color Wedges