Cobra 57959 Скачать руководство пользователя страница 3

Страница: 3 / 101

Page B

For technical questions, please call 1-888-866-5797.

Item 57959

Camera Safety Warnings

1. To prevent electric shock, do not attempt

to disassemble Camera. There are

no serviceable parts inside.

Do not expose the Power Adapter to rain

or wet conditions. Water entering the Power

Adapter will increase the risk of electric shock.

Do not abuse the Power Adapter cord. Never

use the cord for unplugging the plug from the

outlet. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

4. Handle Camera with care. Camera could be

damaged by improper handling or storage.

NVR Safety Warnings

1. Maintain adequate airflow around NVR.

2. Use supplied Power Adapter only.

3. To prevent electric shock, do not

attempt to disassemble NVR. There

are no serviceable parts inside.

Do not expose the Power Adapter or NVR

console to rain or wet conditions. Water

entering the Power Adapter or NVR console

will increase the risk of electric shock.

Do not abuse the Power Adapter cord. Never

use the cord for unplugging the plug from the

outlet. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

6. Maintain labels and nameplates on the unit.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

7. The warnings, precautions, and instructions

discussed in this instruction manual cannot

cover all possible conditions and situations

that may occur. It must be understood by the

operator that common sense and caution are

factors which cannot be built into this product,

but must be supplied by the operator.

SAVE THESE INSTRUCTIONS.

Содержание 57959






































































































Результаты поиска

Содержание 57959

Отзывы:

Похожие инструкции для 57959

Бренды по названию

Популярные бренды

Cobra 57959, Руководство пользователя и инструкции по безопасности

Результаты поиска

Содержание 57959

Отзывы:

Похожие инструкции для 57959

Бренды по названию

Популярные бренды