Cobalt Digital Inc BBG-1090-TRX-MPEG, Руководство по эксплуатации продукта

Страница: 75 / 85

75
The table columns correspond to the licensable features, as follows:
•
Transcode Instances: This field indicates the number of simultaneous transcode
instances the unit is licensed for.
•
Dolby Decodes: This field indicates the number of Dolby decode licenses the unit is
licensed for. A Dolby Decode License is required to transcode one Dolby audio stream
into MPEG-1 Layer II or AAC-LC. No license is required to pass-through Dolby
streams.
If you want to request a license key from Cobalt, you will need to provide the card serial number.
It can be found in the Product Tab and in the Admin License Key Tab as well. Once you receive
the key from Cobalt, enter it in the License Key field shown above, and click on the Apply
License Key button. If the key is accepted, you will see the message License Key Installed OK,
as illustrated above. If there are any problems, you will see an error message in the same
location. The following are the possible error messages:
•
Invalid key: missing characters : the key you entered is too short. Double-check that you
entered all the characters.
•
Invalid/Corrupted Key : the key you entered has the correct number of characters, but it is
invalid. Double check what you entered.
•
Serial number mismatch: this key is for serial xxxxxxxxxxxx : BBG-1090-TRX-MPEG
license keys are specific to a card. You entered a valid license key, but it is intended for
a different card, whose serial number is displayed in the message. You must use this key
on the correct card.
•
This key has already been applied : License keys can only be applied once. This is a
valid key for this card, but you have already applied it, and its features are already
available.