Cobalt Digital Inc BBG-1090-TRX-MPEG, Руководство по эксплуатации продукта

Страница: 16 / 85

16
•
Subnet Mask: 255.255.255.0
•
Gateway: 192.168.1.1
The STAT front panel indicator will change colors for about 3 seconds to acknowledge the
change. Note that this operation does not disturb the encoding function or the streaming
Ethernet ports (i.e., it is not service-affecting).
If you press and hold this switch when the unit is powered off, and then power up the unit while
holding the switch, the following actions will be performed:
•
The control IP address, mask and gateway are reset to the factory defaults as described
above.
•
The unit configuration is cleared.
•
The unit reverts to the factory-installed firmware.
As before, the STAT LED will temporarily change color to acknowledge the command. When it
changes color, you can release the switch. You can use this feature in the unlikely event of a
corrupted firmware upgrade or a corrupted configuration.