Cobalt Digital Inc BBG-1090-TRX-MPEG, Руководство по эксплуатации продукта

Страница: 69 / 85

69
•
Auto-Reboot After Update: This field controls whether or not the BBG-1090-TRX-
MPEG will automatically reboot after a successful firmware upload through Dashboard.
By default, the BBG-1090-TRX-MPEG will
not reboot after an update. You can upload
the firmware at any time, and reboot later during a maintenance window.
Admin Config Files Tab
As you make configuration changes to the BBG-1090-TRX-MPEG, they are automatically
persisted in non-volatile storage. If the card is rebooted or power-cycled, it will come back in
the same configuration.
In addition to automatic configuration persistency, the BBG-1090-TRX-MPEG also offers the
ability to save up to 5 complete configurations, load them, and even export them. This can be
used to quickly configure it for different scenarios, or for saving configuration “checkpoints” as
a complex configuration is built. Since configurations can be exported, they can be archived
outside the card as well.
Finally, the BBG-1090-TRX-MPEG also offers 5 pre-saved configuration templates for some
common scenarios.
The layout of the Admin Config Files tab is shown below.
User-Saved Configurations
Pre-Defined Templates
Status Message Areas