Cobalt Digital Inc BBG-1002-2UDX, Руководство по эксплуатации продукта

Страница: 65 / 114

BBG-1002-2UDX-OM (V1.3) BBG-1002-2UDX PRODUCT MANUAL
3-35
Operating Instructions
BBG-1002-2UDX Function Menu List and Descriptions
Output Flex Mix – Provides a 16-channel mixer in which each of the
inputs can be mixed onto up to 16 independent output summing
nodes. The input sources include audio bus channels from the device
two embedded audio paths. Each input channel has independent
gain and mute controls.
Output Flex Mix
Note:
For each Flex Mix input channel, its source should be considered and appropriately set. Unused input channels should
be set to the Silence selection.
• Flex Bus Input Channel Source/Bus
Assignment
Using the Source drop-down list, selects the audio input source to be
directed to the corresponding bus channel from the choices listed below.
• Silence
• Audio Bus Ch 1 thru Ch 16
• Tones (100 Hz thru 16 kHz)
• Downmix L or Downmix R
The Flex Bus drop-down selects the bus (A thru P) to which the input is
assigned to.
• Gain / Mute Control Provides relative gain (in dB) control and a channel Mute checkbox.
(-80 to +20 dB range in 0.1 dB steps; unity = 0.0 dB)
Table 3-2 BBG-1002-2UDX Function Menu List — continued
Flex Bus A
Flex Mix 1
Flex Mix 2
3
4
Flex
Flex
Flex Mix
Flex Mix
Flex Mix 15
Flex Mix 16
To Path 1 / Path 2
Output Audio
Crosspoints
1
2
8
••
•
Path 1
Path 2
Bus B
Bus P
In this example, audio bus channels 1 thru 8 from each path are summed with the like-channel of the other path. These summed
outputs can then be outputted on any of the audio outputs. The output flex bus allows cross-sourcing from both Path 1 and Path
2 embedded internal Audio Bus sources to the Path 1 and Path 2 discrete output audio crosspoints.