Cobalt Digital Inc BBG-1002-2UDX Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 114

background image

3

BBG-1002-2UDX Function Menu List and Descriptions

3-34

BBG-1002-2UDX PRODUCT MANUAL

BBG-1002-2UDX-OM (V1.3)

Provides audio down-mix audio routing selections that
multiplexes any five audio channel sources into a
stereo pair.

Note: •

Downmixer sub-tabs offer identical independent controls for both Embedded Path 1 and Path 2. Therefore, only the
Path 1 controls are shown here. Set controls for other path using the respective sub-tab.

•

Downmix L/R channel pair sources are available only within a respective path (e.g., Path 1 downmixed channels can
only be sourced from Path 1).

• Downmixer Source Controls

Left Channel Input thru Right Surround Channel Input select the five
audio bus source channels to be used for the downmix.

Downmix channels Downmixer L and Downmixer R are available as
sources for embedded, AES, or analog audio outputs using the Channel
Source controls described above.

• Center Mix Ratio Control

Adjusts the attenuation ratio of center-channel content from 5-channel
source that is re-applied as Lt and Rt content to the DM-L and DM-R
stereo mix.

• 0 dB setting applies no ratiometric reduction. Center channel content is

restored as in-phase center-channel content with no attenuation,
making center-channel content more predominate in the overall mix.

• Maximum attenuation setting (-80 dB) applies a -80 dB ratiometric

reduction of center-channel content. Center-channel content is restored
as in-phase center-channel content at a -80 dB ratio relative to overall
level, making center-channel content less predominate in the overall
mix.

(20 dB to -80 dB range in 0 dB steps; default = 0 dB)

Note: Default setting is recommended to maintain center-channel

predominance in downmix representative to that of the original
source 5-channel mix.

• Surround Mix Ratio Control

Adjusts the attenuation ratio of surround-channel content from 5-channel
source that is re-applied as Lo and Ro content to the DM-L and DM-R
stereo mix.

• 0 dB setting applies no ratiometric reduction. Surround-channel content

is restored with no attenuation, making Lo and Ro content more
predominate in the overall mix.

• Maximum attenuation setting (-80 dB) applies a -80 dB ratiometric

reduction of surround-channel content. Surround-channel content is
restored at a -80 dB ratio relative to overall level, making
surround-channel content less predominate in the overall mix.

(20 dB to -80 dB range in 0 dB steps; default = 0 dB)

Note: Default setting is recommended to maintain surround-channel

predominance in downmix representative to that of the original
source 5-channel mix.

Table 3-2

BBG-1002-2UDX Function Menu List — continued

«
...
62
63
64
65
66
...
»

Содержание BBG-1002-2UDX



















































































































Отзывы:

Нет отзывов

Похожие инструкции для BBG-1002-2UDX

Бренд: 3onedata Страницы: 3

Бренд: 3onedata Страницы: 9

Бренд: 3onedata Страницы: 3

Бренд: 3onedata Страницы: 3

Бренд: 3onedata Страницы: 3

Бренд: 3onedata Страницы: 3

Бренд: 3onedata Страницы: 7

Бренд: TDT Страницы: 2

Бренд: YASKAWA Страницы: 251

Бренд: Baldor Страницы: 55

Solis-100K-HV-5G

Бренд: Ginlong Страницы: 28

Stratophonic SC3

Бренд: Harman Kardon Страницы: 6

Бренд: ADDER Страницы: 2

Бренд: N-Tron Страницы: 40

Бренд: wagner solar Страницы: 52

Бренд: A-TS TECHNOLOGY Страницы: 131

Бренд: FOR-A Страницы: 28

Бренд: CEL-MAR Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды