Cobalt Digital Inc BBG-1002-2UDX, Руководство по эксплуатации продукта

Страница: 76 / 114

3
BBG-1002-2UDX Function Menu List and Descriptions
3-46
BBG-1002-2UDX PRODUCT MANUAL BBG-1002-2UDX-OM (V1.3)
Wings Insertion
Provides wings insertion/width controls and displays
insertion status.
Note:
Wings tab has identical independent controls for both Path 1 and Path 2 using the Path 1 / Path 2 sub-tabs. Therefore,
only the Path 1 controls are shown here. Set controls for other path using the respective sub-tab.
• Wings Source Control Selects the SDI input video port to serve as the wings source.
Note: • SDI inputs selected must be present on rear panel (varies by
model).
• Other wings input choices sourced from Path 1 and Path 2
program video outputs also are available using this
drop-down. These selections are not typically used for normal
use. A white paper describing these use cases may be
developed in the future that explains the use of special looping
alternate-path inputs. In brief, these alternate inputs are useful
for providing two identical video paths with a delay offset
provided by the second processing path.
• Wings Insertion Enable Control Enables or disables wings insertion into the output video.
Note: For conditions where wings is not intended to be inserted, make
certain this control is set to Disabled.
• Wings Width Mode Control Selects wings width control from the choices shown to the left and
described below.
• Manual: Wings L/R width is set using Wings Width manual control
(see below).
• Follow Scaler: Wings width automatically tracks with Scaler aspect
ratio control settings (as configured by Scaler).
• Wings Status Displays Displays wings timing status as described below.
Note: • Wings timing is a function of the wings frame sync card/
device. Ideal wings timing is within 0 to 200 samples early
of output video timing. Wings timing cannot be controlled on
host device wings inserter.
• Error in wings timing will result in loss of wings (however,
program video image will not be corrupted).
Table 3-2 BBG-1002-2UDX Function Menu List — continued
Wings insertion within target 0-200 samples early
Wings insertion late
Wings insertion too early
Wings video wrong/mismatched format