Cobalt Digital Inc 9902-DC-4K Скачать руководство пользователя

Страница: 8 / 62

Manual Conventions

1-4

9902-DC-4K PRODUCT MANUAL

9902DC4K-OM (V1.5)

Warnings, Cautions, and Notes

Certain items in this manual are highlighted by special messages. The
definitions are provided below.

Warnings

Warning messages indicate a possible hazard which, if not avoided, could
result in personal injury or death.

Cautions

Caution messages indicate a problem or incorrect practice which, if not
avoided, could result in improper operation or damage to the product.

Notes

Notes provide supplemental information to the accompanying text. Notes
typically precede the text to which they apply.

Labeling Symbol Definitions

Important note regarding product usage. Failure to observe may result in
unexpected or incorrect operation.

Electronic device or assembly is susceptible to damage from an ESD
event. Handle only using appropriate ESD prevention practices.

If ESD wrist strap is not available, handle card only by edges and avoid
contact with any connectors or components.

Symbol (WEEE 2002/96/EC)

For product disposal, ensure the following:

• Do not dispose of this product as unsorted municipal waste.

• Collect this product separately.

• Use collection and return systems available to you.

Содержание 9902-DC-4K































































Результаты поиска

Содержание 9902-DC-4K

Отзывы:

Похожие инструкции для 9902-DC-4K

Бренды по названию

Популярные бренды

Cobalt Digital Inc 9902-DC-4K, Руководство по эксплуатации продукта

Результаты поиска

Содержание 9902-DC-4K

Отзывы:

Похожие инструкции для 9902-DC-4K

Бренды по названию

Популярные бренды