Cobalt Digital Inc 9902-DC-4K Скачать руководство пользователя | Manualshive

Страница: 34 / 62

background image

3

9902-DC-4K Function Menu List and Descriptions

3-10

9902-DC-4K PRODUCT MANUAL

9902DC4K-OM (V1.5)

(continued)

•Video Lock Mode Select

(Option +FS) Selects lock to reference functions from the choices shown
and described below.

• Lock to Reference: Quadrant inputs and output video is locked to

selected external reference (Ref 1 or Ref 2) received on the frame
reference bus, else input.

• Lock to Input A: Uses Input A program video input video signal as

the reference standard, else free-run.

• Free Run: Quadrant inputs and output video is locked to the card’s

internal clock. Output video is not locked to external reference.

Note: Lock to reference provides the most stable operation, and is

preferred where available. In this case, source video should also be
locked to the same reference.

• Frame Delay Control

When Framesync is enabled, specifies the smallest amount of latency
delay (frames held in buffer) allowed by the frame sync. The frame sync
will not output a frame unless the specified number of frames are captured
in the buffer.

HDMI controls described below provide settings to force an HDMI or DVI output suitable for direct connection to monitors using
a DVI input in case the connection is not detected by the monitor. Also provides color mode controls to match HDMI/DVI output
to the color space of the monitor.

• Mode Control

Sets HDMI/DVI output to use the connected monitor to inform

9902-DC-4K to automatically detect the monitor format, or to use manual
(forced) control.

Where the monitor may not be able to provide this handshake signal, it is

recommended to use Manual mode and force the desired mode as
described below.

• Format Manual (Forced) Mode Controls

When Mode control is set to Manual, allows setting HDMI output as
forced HDMI or DVI mode.

Also when in manual mode, allows setting HDMI output colorspace as
either forced YCbCr or RGB.

Note: The HDMI output on this card conforms with CEA-861D HDMI audio channel line-up specifications. As such, a swap
between the C and LFE channels for the HDMI output is automatically performed.

If connecting to a device that does not meet CEA-861D HDMI, a Ch3 / Ch4 swap using the Output Audio Routing/Controls may
be required to effect desired C - LFE line-up.

Table 3-1

9902-DC-4K Function Menu List — continued

L

R

C

LFE

Ls

Rs

L

R

LFE

C

Ls

Rs

SDI SMPTE

Convention

9902-DC-4K

Conversion

Automatic Re-Line-up

to CEA-861 Convention

«
...
32
33
34
35
36
...
»

Содержание 9902-DC-4K































































Отзывы:

Нет отзывов

Похожие инструкции для 9902-DC-4K

Бренд: Camoga Страницы: 43

Бренд: HEIDENHAIN Страницы: 6

Бренд: T-TeleSec Страницы: 21

Бренд: Kaco Страницы: 52

Pocket Inverter 100

Бренд: XPower Страницы: 38

PowerClean Salt Econ

Бренд: CMP Страницы: 24

Бренд: 3onedata Страницы: 2

STORAGE PACKAGE - BUSINESS

Бренд: SMA Solar Technology AG Страницы: 30

Бренд: Hyundai Страницы: 35

High Speed Asynchronous to Synchronous Converter...

Бренд: B&B Electronics Страницы: 11

Бренд: Ensemble Designs Страницы: 24

Бренд: ADF Web Страницы: 24

Бренд: AJA Страницы: 43

Бренд: red lion Страницы: 4

Бренд: Escient Страницы: 369

Бренд: C.E.C. Страницы: 24

Бренд: Fronius Страницы: 68

Varispeed CIMR-V7AZ Series

Бренд: YASKAWA Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды