Cobalt Digital Inc 9902-DC-4K Скачать руководство пользователя | Manualshive

Страница: 60 / 62

background image

3

Troubleshooting

3-36

9902-DC-4K PRODUCT MANUAL

9902DC4K-OM (V1.5)

4.

Remove power from the card (remove card from slot or power-down
BBG-1000 Series unit).

5.

Re-apply power to the card. The card/device will display as
“UNLICENSED” in DashBoard/remote control.

6.

In Dashboard or web remote control, go to

Admin

tab and click

Restore from SD Card

. After about 1/2-minute, the card license(s) will

be restored and card will be using its most recently installed firmware.

7.

Card/device can now be used as normal. On BBG-1000 Series unit,
re-install top cover.

Contact and Return Authorization

Should any problem arise with this product that was not solved by the
information in this section, please contact the Cobalt Digital Inc. Technical
Support Department.

If required, a Return Material Authorization number (RMA) will be issued to
you, as well as specific shipping instructions. If required, a temporary
replacement item will be made available at a nominal charge. Any shipping
costs incurred are the customer’s responsibility. All products shipped to you
from Cobalt Digital Inc. will be shipped collect.

The Cobalt Digital Inc. Technical Support Department will continue to
provide advice on any product manufactured by Cobalt Digital Inc., beyond
the warranty period without charge, for the life of the product.

See Contact Cobalt Digital Inc. (p. 1-14) in Chapter 1, “Introduction“ for
contact information.

«
...
58
59
60
61
62
»

Содержание 9902-DC-4K































































Отзывы:

Нет отзывов

Похожие инструкции для 9902-DC-4K

Бренд: Teac Страницы: 48

Бренд: Datavideo Страницы: 10

Бренд: VAD Страницы: 18

Бренд: iConnectivity Страницы: 21

Бренд: ItsImagical Страницы: 23

Бренд: Cosel Страницы: 62

Бренд: QUAD Страницы: 2

Бренд: Kramer Страницы: 12

Бренд: Dantel Страницы: 18

Бренд: YOKOGAWA Страницы: 4

Бренд: Tektronix Страницы: 74

Бренд: DAB Страницы: 1024

Click Board ADC 3 click

Бренд: Mikroe Страницы: 2

IFS MC250-4T Series

Бренд: Interlogix Страницы: 23

Бренд: Laser Страницы: 21

blueplanet 87.0 TL3

Бренд: Kaco Страницы: 115

Бренд: APT Страницы: 43

Бренд: Orgautomatech Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды