Cobalt Digital Inc 9902-DC-4K Скачать руководство пользователя | Manualshive

Страница: 52 / 62

background image

3

9902-DC-4K Function Menu List and Descriptions

3-28

9902-DC-4K PRODUCT MANUAL

9902DC4K-OM (V1.5)

(continued)

• Card Check and Restore Utilities

Memory Test allows all cells of the card FPGA memory to be tested.

This control should only be activated under direction of

product support. Exercising the memory test is not part of
normal card maintenance.

Restore from SD Card allows card rendered inoperable to be restored
using an SD memory card fitted to the card internal SD slot.

Product support must be contacted prior to performing this

operation. Use of any SD card not supplied by support can
corrupt the card.

The Networking sub-tab provides a dedicated Ethernet connection to
card control and monitoring via a rear module Ethernet port. (This IP
interface is entirely independent and separate from the card’s DashBoard
frame-based remote control/monitoring interface.)

(Dedicated card control using IP has not been fully implemented at this
release. Some functions may be reserved.)

• Card IP Physical Port Select Control

Allows card dedicated IP interface (as set below) to use frame
communications or dedicated rear I/O module Ethernet RJ-45 port.

Note: • Frame net connection allows cards with per-card Ethernet

connection to connect with network via a shared frame Ethernet
port instead of per-card dedicated Ethernet connectors on the
card’s rear module. Frame net connection is available only on
certain frame models.

• Card slot must be fitted with a rear I/O module equipped with an

Ethernet connector in order to use Rear I/O selection.

• Card IP Setup Controls

Provides controls for setting up card dedicated IP interface.

• Addressing Mode selsects either DHCP or static.

Where Static is selected, standard IP fields allow entry of Address,
Subnet Mask, and Default Gateway.

• Card SNMP MIB Download

Where supported, allows card SNMP MIB files to be downloaded and
saved using user-configured name.

Table 3-1

9902-DC-4K Function Menu List — continued

«
...
50
51
52
53
54
...
»

Содержание 9902-DC-4K































































Отзывы:

Нет отзывов

Похожие инструкции для 9902-DC-4K

INDUSTRIAL Series

Бренд: ICT Страницы: 2

Бренд: Cobra Страницы: 11

Бренд: Sonoro Страницы: 148

Бренд: VOLTCRAFT Страницы: 10

Бренд: IBA Страницы: 44

Бренд: Nitek Страницы: 2

AT-IMC100T/SCMM

Бренд: Allied Telesis Страницы: 20

Бренд: Avermedia Страницы: 1

PROFI BUS Multiturn 5868 Series

Бренд: Sendix Страницы: 22

Бренд: Comtech EF Data Страницы: 102

Бренд: CableTronix Страницы: 5

Бренд: Waversasystems Страницы: 15

Бренд: World Friendship Страницы: 17

Бренд: Plexim Страницы: 8

Бренд: Wisenet Страницы: 8

Бренд: DAB Страницы: 1024

ELinx EIR-G-SFP-T

Бренд: B&B Electronics Страницы: 2

Бренд: American Dynamics Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды