Cobalt Digital Inc 9902-DC-4K Скачать руководство пользователя | Manualshive

Страница: 9 / 62

background image

9902DC4K-OM (V1.5)

9902-DC-4K PRODUCT MANUAL

1-5

Introduction

Safety and Regulatory Summary

Safety and Regulatory Summary

Warnings

Cautions

EMC Compliance Per Market

! WARNING !

To reduce risk of electric shock do not remove line voltage service barrier cover on frame
equipment containing an AC power supply. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

This device is intended for environmentally controlled use only in appropriate video
terminal equipment operating environments.

CAUTION

This product is intended to be a component product of an openGear® frame. Refer to the
openGear® frame Owner's Manual for important safety instructions regarding the proper
installation and safe operation of the frame as well as its component products.

CAUTION

Heat and power distribution requirements within a frame may dictate specific slot
placement of cards. Cards with many heat-producing components should be arranged to
avoid areas of excess heat build-up, particularly in frames using only convection cooling.
The 9902-DC-4K has a moderate power dissipation (<18 W). As such, avoiding placing the
card adjacent to other cards with similar dissipation values if possible.

CAUTION

If required, make certain Rear I/O Module(s) is installed before installing the 9902-DC-4K
into the frame slot. Damage to card and/or Rear I/O Module can occur if module
installation is attempted with card already installed in slot.

CAUTION

If card resists fully engaging in rear I/O module mating connector, check for alignment and
proper insertion in slot tracks. Damage to card and/or rear I/O module may occur if
improper card insertion is attempted.

CAUTION

The 9902-DC-4K FPGA is designed for a normal-range operating temperature around 85° C
core temperature. Operation in severe conditions exceeding this limit for non-sustained
usage are within device operating safe parameters, and can be allowed by setting this
control to Disable. However, the disable (override) setting should be avoided under
normal conditions to ensure maximum card protection.

Market

Regulatory Standard or Code

United States of America

FCC "Code of Federal Regulations" Title 47 Part15, Subpart B, Class A

Canada

ICES-003

International

CISPR 24:2010

IEC 61000-4-2:2008

IEC 61000-4-3:2006 with A1:2007 and A2:2010 IEC 61000-4-4:2004

IEC 61000-4-6:2008

IEC 61000-6-3:2006 with A1:2010

CISPR 22:2008

«
...
7
8
9
10
11
...
»

Содержание 9902-DC-4K































































Отзывы:

Нет отзывов

Похожие инструкции для 9902-DC-4K

CQDFX972U - AUTO RADIO/CD DECK

Бренд: Panasonic Страницы: 4

CQC1300U - AUTO RADIO/CD DECK

Бренд: Panasonic Страницы: 3

VIP-5000 Series

Бренд: Daktronics Страницы: 6

Бренд: Daikin Страницы: 255

Бренд: Peak Страницы: 8

Бренд: Cerwin-Vega Страницы: 12

I/O SYSTEM FIELD 765-2704/200-000

Бренд: WAGO Страницы: 42

Бренд: Wacker Neuson Страницы: 36

Бренд: Badger Meter Страницы: 12

Pocket Inverter 100

Бренд: XPower Страницы: 38

Бренд: X-Micro Страницы: 84

Бренд: Inter-m Страницы: 20

Бренд: DANE-ELEC Страницы: 2

SUNNY BOY 3000-US

Бренд: SMA Страницы: 36

Бренд: Tektronix Страницы: 11

Бренд: AGM Страницы: 71

MultiMedia Box M4

Бренд: Evolveo Страницы: 8

Бренд: Solplanet Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды