CNC CNCWL- 5136-XN, Руководство оператора

Страница: 9 / 30

CNCWL-XN Series Machines
Fire & Hazardous Materials
⚠ WARNING : This machine uses high heat to engrave, etch and cut material. At no point should the machine be left
unsupervised while it is in use. Leaving the machine unattended while in use can result in a fire or substantial damage to the
machine and the building it resides in. Any damage by fire that is not due to defects in workmanship or the machine itself
will NOT be covered by CNC Warehouse LLC Limited Warranty.
⚠ Hazardous Materials : Any and all materials considered hazardous to the health of the machine, the health of the
individuals operating the machine and the individuals surrounding the machine while in use are NOT recommended to etch,
cut or engrave. These materials can produce toxic fumes or cause the machine to not function properly and need
replacement parts.
Materials that should NOT be cut, etched or engraved:
• 
Metals - The XN Series CO2 lasers are not capable of engraving or cutting metals. It only has the
capability to etch metals with a coating ( anodized, thermark, powder coatings, etc. )
•

Polycarbonate -Fumes produced by plycarbonate can cause irritation to eyes, skin and the respiratory
tract.
•

PVC Compounds- Fumes produced by Polyvinyl Chlorine can cause irritation to eyes, skin and the
respiratory tract. This material should not be exposed to elevated temperatures.
• 
Vinyl - Fumes produced by Binyl that has Chlorine can cause irritation to eyes, skin and the
respiratory tract. This material should not be exposed to the elevated temperatures.
Helpful Hint:
Majority of materials have a “Material Safety Data Sheet” or MSDS, these can tell you whether materials are safe or not and
whether they can be exposed to high heat. Any material containing chlorine is not safe to your laser or any individuals near
the fumes. If you are still unsure abount the materials and its properties, give us a call and we will be happy to try and
identify the safety of the material and wheter it can be lasered or not.
CNC Warehouse LLC 5