CNC CNCWL- 5136-XN, Руководство оператора

Страница: 29 / 30

CNCWL-XN Series Machines
Rotary Option -Continued
Plug the rotary power cable in here then power up the laser. The “homing” will look
different. The rotary will rotate for a continous period. Feel free to pres “ESC” to stop
its rotation.
Remember to set your focal point on the peak of the materal. Level the material
using the Rotary adjustment knob.
When done, to return the machine to its normal mode.
1. Power down the machine, replace the plug to the Y-axis.
2. Power machine back on.
3. Press “read” to obtain the settings in the RUIDA controller
4. Change Enable roating to “NO”
5. Press “write” to send the new settings to the RUIDA controller.
Chuck Rotary Setup
Every step remains the same. The only difference is the parameters:
1. Enable Roating= Yes
2. Circle Pulse= 6800
3. Hint- send a 25mm X 25mm square from RD Works to the rotary.
Measure it and ensure it is 25mm. Some adjustment to the pulse
number may be required.
4. Measure the diameter of the product you are engraving and input the
CNC Warehouse LLC 25