CNC CNCWL- 5136-XN, Руководство оператора

Страница: 16 / 30

CNCWL-XN Series Machines
Important Switches
There are several switches installed on the laser cabinet. The first switch to identify is the main On/Off power
switch, this can be shown in Figure 6above the large red button. The On/Off switches located on our machines
are done by turn key. This ensures than nonauthorized person can use the machine. There should be two sets
of keys within your tool box, we recommend keeping the second pair in a safe place.
Control Panel HID/Keypad
Introduction to the Keys:
●
Reset: This key will refresh the system and will stop all running applications and return to themain
interface.
●
Origin: This key will let you select the starting point of your file within the work table.
●
Pulse: Pulses the laser beam
●
Frame: This key will show you the framed area of which your file will run in
●
File: The management of the memory and Udisc files
●
Speed: Setting the speed of the current running layer, or to set the direction keys’ move speed
●
Max. Power: Set the maximum laser power of the current running layer or set the power of
the“Pulse” key
●
Min. Power: Set the minimum laser power of the current running layer
●
Start/Pause: To start or pause the current work on the laser
●
Left & Right Arrow: To move the X-Axis of the left/right cursor
●
Up & Down Arrow: To move the Y axes or the up/down cursor
●
Z/U Button: The Z/U key can be pressed when the system is idle, or the work is finished.Pressing
on this key will show some entries in the interface, each entry will include somefunctions, Z-Axis
move, U-Axis move, each Axis to go home, etc.
●
Esc: Stops the current work that the machine is doing or to exit the current menu
●
Enter: Validate the choice or change.
CNC Warehouse LLC 12