CNC CNCWL- 5136-XN, Руководство оператора

Страница: 24 / 30

CNCWL-XN Series Machines
Laser Maintenance Schedule (Continued)
ceramic space heater inside of the laser machine with the temperature set to a moderate temperature. The
heat will move throughout the inside of the laser and keep the glass laser tube warm enough not to freeze,
crack or break. A sudden shock of icy cold water rushing into the warm glass can break the glass laser tube.
But, what to do about the water pump, bucket or chiller?
There are a few options:
1.Use an aquarium heater to warm the water and set the temperature to a moderate level.Remember
that the water in the hoses can still freeze, use a timer to switch the water pumpon/off every fifteen
minutes.
2.If you are worried about wasting the life of your pump, drain the laser coolant from the
entiresystem. Disconnect the hoses from the laser machine and use an air compressor to blow as
muchwater out as you can. Blow air into the water hose connected to the laser from the “water
out”port. Take the chiller to a place where it will not freeze and puta heater inside of the machine.
3.Move the laser machine and all components in a temperature-controlled environment withno risk of
freezing.
Machine Memory:
There should always be little to no files stored on your machine’s memory. A large number of files can cause
the controller card to have a slower reaction time when using the LED Control Panel and screen. If the
machine’s memory is pushed to its limits, it has the possibility to crash the controller card and or lock up the
entire machine. This machine is just like a computer, if you acquire a large number of files over time, it will
cause the operating system to slow down.
CNC Warehouse LLC 20