CNC CNCWL- 5136-XN, Руководство оператора

Страница: 11 / 30

CNCWL-XN Series Machines
⚠
Laser Safety & Policies
⚠
First and formost, BE CAREFUL.Laser machines are a powerful tool and the proper precautions should
be taken, just as if you were working with any other high-powered tool or machinery. Thes machines are
designed to cut and engrave with highly focused heat engergy and can be gangerous. Ou should never leave
your machine unattended while it is in operation. Do not let an inexperienced or unfamiliar person operate
your machine at any time.
Always keep any access covers on and keep the toplid closed whenever the machine is in operation.
Avoid any direct exposure and do not stare at the laser beam while the machine is operating. Notice and
understand all the warning labels located on your machine.
The following safety measures must be strictly enforded and be abided by to ensure the safety of the
machine and the individual operating it. CNC Warehouse LLC shall not be held responsible for any damages or
injuries resulting from improper use or dismantling of the laser machine.
●
NEVER operate laser machinery unless you have been properly trained.
●
ALWAYS use protective eyewear (preferably wrap around goggles); Or keep te lid closed.
●
ALWAYS be sure to keep the exhaust fan running while the machine is in use.
●
NEVER set anything on top of the laser and/or on the worktable while not in use.
●
NEVER leave the laser unattended while it is running. This will ensure that you are able to see or hear
any abnormalities / Potential hazards.
●
ALWAYS maintain the machine's environmental free of heavy pollution, such as strong magnetic
electrial interference.
●
NEVER operate the lase machine without a separate DEDICATED electrical grounding. Refer to a
licensed electrician for details on proper grounding techniques.
●
NEVER use unapproved or unsafe materials, such as Polyvinyl Chloride (PVS) or any materials that
emit noxious gases. Thes gases can cause harm to your central nervous system.
●
NEVER operate the laser near flammable or explosive substances. The UV light beam that is emitted
is not visible and poses a fire hazard.
●
NEVER lift the lid of the machine while it is running.
●
NEVER engrave or try to cut reflective material, the laser beam can reflect and deviate (bounce
around) which can cause blindness or serious injury, requiring medical attention.
●
NEVER push or pull the laser head and its gantry while the laser is running.
●
NEVER dismantle the laser machine, this can disrupt the laser and its high voltage/ pressure parts.
This can cause harm or inury.
●
ALWAYS clean out the collection tray(s) to prevent accidental hazards.
●
ALWAYS store a fire extinguisher near your machine.
⚠ In Case of fire:
●
Presss the EMERGENCY STOP button.
●
Lift the lid.
●
Quickly blow out the flame(s), a CO2 fire extinguisher for serious flames.
CNC Warehouse LLC 7