CNC CNCWL- 5136-XN, Руководство оператора

Страница: 13 / 30

CNCWL-XN Series Machines
Laser Setup
1. Make sure to remove any foam or padding from inside or outside of the machine, this includes
the inside of the cabinet.
2. Remove any plastic ties used for securing the laser head from moving while in transit.
3. Check for any nuts or bolts that may have come off or become loose during transit, these can
usually be found in the bottom of the cabinet.
4. Depending on what options you had purchased with your laser, the crate or pallet will have
several boxes.Additionally, some units will have accessories taped to the working table, locate
and identify any of these. If you think anything is missing from your machine or crate, please
contact your sales representative.
The loose boxes in the crate should contain the following things :
5. An air pump or compressor
6. A water pump or water chiller (CW-3000, CW-5000)
7. Exhaust Fan
8. A Toolbox that contains necessary software, accessories, or parts(extra lenses)
9. Additional accessories such as: rotary attachments, cleaning kits, etc.
✎Note: Some machine crates will come with a pallet; this pallet willcontain the accessories
that did not fit in the crate. If you received a crate with only the machine and no extra boxes
and you did not receive a pallet, contact your sales representative to see if you are missing
components.
Exhaust Fan Set-Up
The exhaust of your machine requires the most effort and its importance cannot be overstated. The laser
vaporizes material as it moves along the axis, this generates large amounts of smoke.
⚠ Some materials such as leather or wood generate larger amounts of smoke than other materials. The
exhaust is necessary to remove harmful fumes and smoke. The exhaust must be ducted to the outside and
away from any area where animals or humans congregate. When ducted correctly, a laser can be placed in an
office or spare room. Larger in-line exhaust fans are available through Grainger.com or other industrial supply
houses, these are recommended if your application requires constant cutting of material that gives off heavy
smoke.
Additionally, be certain to have the on/off switch within reach of the laser panel for easy access at all times.
The exhaust fan must be turned on and used each time the laser is running and in use.
6” flexible pipe included with your laser connects to the back side of your machine with the included 6” band
clamps. Route the flexible tubing to the inlet side of your Exhaust fan. Due to the noise the Exhaust Fan can
be mounted in a separate location. Power should be a dedicated electrical circuit. DO NOT plug into the back
of your laser. The high electrical flow will “Blow” the fuse located in the power receptical See picture
CNC Warehouse LLC 9