CNC-Step KinetiC-NC Скачать руководство пользователя страница 112

Страница: 112 / 127

KinetiC-NC

User Manual

CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany

Page 112

Support: +49 (0)2831/91021-50

10.11.2018

M a i n t e n a n c e m o d e

The safety door and the alarm function are usually designed to protect the user from injury and the

machine from damage. In certain cases, however, the safety functions may block each other.

Suppose there is a technical defect that triggers an alarm condition. However, the defect can only be

remedied if the machine were moved a short distance to get to the location with the defect. The

alarm blocks all machine movements.

In this case, there is nothing left but to break the "vicious circle" by overriding the blockage caused

by the alarm condition.

This is the maintenance mode, which is activated with the button on the setup page.

Since overriding the security feature involves a high level of risk, this feature is only

available when logged in as an administrator. Before releasing the machine and

switching outputs, the following warning message is displayed, which must be confirmed firs

In order to prevent the maintenance mode from permanently bypassing the safety functions, the

execution of CNC programs in maintenance mode is not permitted. In order to resume normal

operation of the machine, maintenance mode must be exited first. This happens automatically when

closing the security door.

Содержание KinetiC-NC
































































































































Результаты поиска

Содержание KinetiC-NC

Отзывы:

CNC-Step KinetiC-NC, Руководство пользователя, Страница: 112 / 127

Результаты поиска

Содержание KinetiC-NC

Отзывы: