CLIVET WSAT-XSC3 260.6-480.8, Инструкция по установке и эксплуатации

Страница: 22 / 76

22 WSAT-XSC3 260.6-480.8 M08T40D16-02
6.9 Voltages
Check that the air and water temperatures are within in the operating limits.
Start-up the unit.
With unit operating in stable conditions, check:
•
Voltage
•
Total absorption of the unit
•
Absorption of the single electric loads
6.10 Demand limit
Menu accessible only after having entered the password.
Access reserved only to specifically t ained personnel.
The parameter modific tion can cause irreversible damages.
It is possible to limit the absorbed electric power with an external signal 0-10 Vcc.
The higher the signal is, the lower the number of compressors available to meet the thermal need.
If only P0002: EnDemandLimit ≠ 0
Path: Main Menu / Unit parameters / Demand limit
C1 C1 C1 C1
C2 C2 C2
C3 C3
C4
0V 10V
Demand
Limit signal
25%
50%
100%
P0002 EnDemandLimit = 1
10.02.2012 10:15:30
ActualSetPoint 8.5°C
T.InH2OUtilitySide 10.5°C
T.OutH2OUtilitySide 12.5°C
ActualState ON
ActualMode Cool
2 1 0 50%
A
B
C
D
E
F
P0002 EnDemandLimit = 2
P0200 SetpointDemandLimit
10.02.2012 10:15:30
ActualSetPoint 8.5°C
T.InH2OUtilitySide 10.5°C
T.OutH2OUtilitySide 12.5°C
ActualState ON
ActualMode Cool
2 1 0 50%
A
B
C
D
E
F
SetDL
C1 C1 C1
C2
C3
C4
100%
Step Display Action Menu/Variable Keys Notes
1 Press 3 sec.
2 Password Set Password
3 Press
4 Main menu Select Unit parameters
5 Unit parameters Select Set Point
6 Set Point Select Demand limit
7 Set Demand limit
8 Confirm
9 Press 3 sec.
10 Select Local connections
Path: Main Menu / Unit parameters / Demand limit
Parameters Short description Description
P0200 setpointdemandlimit Parameter setting of the value % of demand limit