CLIVET WSAN-YSi R32 Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 74

CLIVET WSAN-YSi R32 Скачать руководство пользователя страница 64

General technical data

The Product is compliant with the ErP (Energy Related Products) European Directive. It includes the Commission delegated Regulation (EU) No 811/2013 (rated heat output ≤ 70 kW at

specified reference conditions) and the Commission delegated Regulation (EU) No 813/2013 (rated heat output ≤ 400 kW at specified reference conditions)

Contains fluorinated greenhouse gases (GWP 675)

1. Entering/leaving water temperature user side 30/35 °C, Entering external exchanger air temperature 7 °C (R.H. = 85%)

2. COP (EN 14511:2018) Heating performance coefficient. Ratio between delivered heating capacitu and power input in compliance with EN 14511:2018. The overall power absorbed

is calculed by adding the power absorbed by the comp the power absorbed by the fan - the percentage value of the fan to overcome external pressure drop + the power

absorbed by the pump - the percentage value of the pump to overcome pressure drop o thepower absorbed by the auxiliary electrical circuit

3. Entering/leaving water temperature user side 40/45 °C, Entering external exchanger air temperature 7 °C (R.H. = 85%)

4. Entering/leaving water temperature user side 23/18 °C, Entering external exchanger air temperature35 °C

5. EER (EN 14511:2018) cooling performance coefficient. Ratio between delivered coolimg capacitu and power input in compliance with EN 14511:2018. The overall power absorbed is

calculated by adding the power absorbed by the comp the powerabsorbed by the fan - the percentage value of the fan to overcome external pressure drop + the power

absorbed by the pump - the percentage value of the pump to overcome presure drop o thepower absorbed by the auxiliary electrical circuit.

6. User side entering/leaving water temperature 12/7 °C, external exchanger entering air 35°C

7. Seasonal Space Heating Energy Efficiency Class according to Commission delegated Regulation (EU) No 811/2013. W = Water outlet temperature (°C)

8. Data referred to unit operation with inverter frequency optimized for this application.

9. Data calculated according to the EN 14825:2016 Regulation

10. Seasonal energy efficiency in heating EN 14825:2018

11. Seasonal energy efficiency in cooling EN 14825:2018

Performance

64

«
...
62
63
64
65
66
...
»

Содержание WSAN-YSi R32











































































Отзывы:

Нет отзывов