CLIVET WSAN-YSi R32 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 74

CLIVET WSAN-YSi R32 Скачать руководство пользователя страница 2

Dear Customer,

We congratulate you on choosing this product

Clivet has been working for years to offer systems able to assure the maximum comfort

for a long time with highly-reliable, efficient, high-quality and safe solutions.

The target of the company is to offer advanced systems, that assure the best comfort

and reduce energy consumption as well as the installation and maintenance costs for
the entire life-cycle of the system.

With this manual, we want to give you information that are useful for all phases: from

reception, installation and use to disposal - so that such an advanced system can
provide the best performances during installation and use.

Best regards and have a good read.

CLIVET Spa

The data contained in this manual is not binding and may be changed by the manufacturer without prior
notice. Reproduction, even partial, is FORBIDDEN. © Clivet S.p.A. - Feltre (BL) - Italia

«
1
2
3
4
...
»

Содержание WSAN-YSi R32











































































Отзывы:

Нет отзывов