CLIVET CSRN-XHE2 Series, Руководство пользователя

Страница: 14 / 92

14
Gas heating module
Option
Burner with low pollutant emissions (NOx below 80 mg/kWh), in line with Class 5 of the EN 676 European
standard is supplied with a gas increase control for methane or LPG.
The heating module with burner includes:
 hot air generator powered with methane

kit for transformation of power with liquefied petroleum gas (LPG)
 kit of steel chimney for exhaust fumes

all the control and safety devices

The component requires gas supply (gas connections to be made by the Customer).

The location of the unit and the fume drain mode must comply with laws and standards in force in the
Country of use.

The Costumer may choose the flue chimney.

The Costumer is responsible for mounting the chimney kit during installation.

Based on the specific installation requirements, the length of the chimney can be increased with suitable
joints and fittings (not supplied by Clivet).
Gas connection
 Read the gas heating module manual.

Connection must be carried out by qualified personnel.
 use certified components and comply with the local standards in force

install on the gas connection: tap, large section filter and anti-vibration joint

check the supply pressure is correct and stable, in particular where more uses are inserted on the same
line.
System maintenance booklet

t must be kept in the place of installation of the unit

It must be filled-in upon commissioning

It must be updated with the results of the periodical checks, of the routine and extraordinary
maintenance interventions.
 Gas cock

Gas filter (large section)
 Anti-vibration joint

Gas filter (small section)
 Safet gas solenoid vlave

Pressure stabiliser

Main gas burner solenoid valve

Pilot burner gas solenoid valve