CLIVET CSRN-XHE2 Series, Руководство пользователя

Страница: 28 / 92

28
S TA R T - U P
The indicated operations must be carried out by qualified
technicians and specifically trained on the product.
Upon request, the after-sales assistance centres execute start-up.
The electric, hydraulic connections and the other work of the
system are the responsibility of the installer.
Agree the start-up date with the after-sales assistance centre with
sufficient advance
Before starting any check, verify that :
 the unit is perfectly installed and in compliance with that
reported in this manual
 the electric power supply line of the unit is isolated at start-
up
 the isolation device of the line is open, blocked and equipped
with relative signal.
 make sure no tension is present

After turning off the power, wait at least 5 minutes before
accessing to the electrical panel or any other electrical
component.

Before accessing check with a multimeter that there are no
residual stresses.
UV-C lamps
Option
Caution
 Direct radiation device: causes eye irritation and skin rashes.

Any maintenance operation must be carried out with the
lamps off.
Preliminary checks
For details refer to the various chapters in the manual.
Unit OFF power supply
1 safe access
2 functional spaces
3 air flow: correct return and supply (no bypass, no
stratification)
4 integrity of structure
5 fans turn freely
6 unit on anti-vibration devices
7 condensate drain
8 air filters present and clean
9 completed aeraulic system
10 cooling circuit visual control
11 earth connection
12 power supply features
13 electric connections by customer