Climax FF7200, Руководство по эксплуатации

Страница: 61 / 146

P/N 59129, Rev. 9 Page 53
Operation
Do not operate this machine without adequate training to understand fully the safe setup, operation,
and maintenance procedures.
WARNING
To avoid serious personal injury, keep clear of moving machinery during
operation.
Pre-start checks
WARNING
Rotating machinery can cause serious injuries. Turn off and lock out the
machine before making the pre-start checks. When operating the machine,
always be aware of the location of all people in the vicinity of the machine.
Before starting the machine, always check the following:
•
All energy sources are off.
•
Lines are properly connected.
•
The machine is securely mounted to the workpiece
and leveled or aligned to the job’s requirements
(see “
Chuck mounting
”
section on page 23
and “
Centering and leveling the machine
”
section on page
30).
•
The machining arm and counterweight arm are secured to the turntable and correctly adjusted and
secured. Torque the machining arm mounting bolts to 45 ft-lbs (61 Nm) and torque the counterweight
arm mounting bolts to 55 ft-lbs (75 Nm).
CAUTION
Make sure that the machine (including the spindle and all movable parts) can
rotate without collisions.
•
The rigging has been removed from the machine. Do
not remove the lifting eyes.
•
All handles and tools are removed from the
machine.
•
Cables and hoses are secured away from the path
of moving machine parts.
CAUTION
Metal chips and other debris can damage the machine and degrade its
performance. Ensure all metal chips and other debris are removed from the
machine before and after each use.