Climax FF7200, Руководство по эксплуатации

Страница: 23 / 146

P/N 59129, Rev. 9 Page 15
•
Follow all proper lifting procedures and secure the machine properly before lifting.
•
Only use slings, straps or chains that are rated for the weight of the equipment.
DANGER
Do not lift the assembled machine by the lifting eyes or hoist
rings on the counterweight or the machining arm. Only lift the
assembled machine by the lifting eyes.
Lifting the assembled machine by other lifting points can cause
the machine to fall from the rigging.
There are four hoist rings locations on the top of the rotary table. Depending on the application
orientation, secure the supplied hoist rings in the necessary locations. When lifting the machine,
pay special attention to the location of the center of gravity when lifting. Always make sure that all
machine parts are tightened properly to prevent hazards.
Installation Hazards
The installation stage can be dangerous, as it relies on the operator and other personnel following
the recommended safety precautions. Consider the following warnings carefully before
undertaking the assembly process.
WARNING
Swinging or falling machinery could cause serious injury or death to
personnel. Secure all components to the machine before lifting. Use
supplemental rigging, such as setup fingers, during setup.