Climax FF7200, Руководство по эксплуатации

Страница: 22 / 146

Page 14 FF7200 Operating Manual
Lifting and rigging
DANGER
The FF7200 is very heavy when fully assembled. Use caution and
follow all site rigging procedures such as a lift plan and never
allowing anyone under the load. Falling or uncontrolled swinging of
machinery can cause serious injury or death.
The FF6200 has lifting points for individual sub-assemblies and for the completely assembled
machine, as shown below.
Figure 4. Designated lifting points
Table 4. Lifting point figure identification
Number Description
1 Hub diameter
2 Inside flange
3 Support legs
The sub-assemblies may be disassembled and individually lifted by the labeled hoist rings on each
sub-assembly.
The counterweight lifting eyes can be positioned in many locations depending on the configuration
and orientation of the machine. Only use these lifting eyes to lift the counterweight.
•
Connect the appropriate lifting equipment to the lifting eyes located on top of the
machine when lifting the entire assembly.
•
Use all four lifting eyes for stability.
•
Never lift the machine by the drive motors, pneumatic lines, controls, machining arm, or
counterweight.
•
The machine can be broken down into more manageable sections for easier lifting.
CAUTION
Lift the machine ONLY by the hoist rings marked.