Climax FF7200, Руководство по эксплуатации

Страница: 47 / 146

P/N 59129, Rev. 9 Page 39
Table 7. Recommended OD mounting setup
Mounting
Diameter*
Machining
Diameters
10" (254
mm) leg 5" (127
mm) leg
2.5" (63.5
mm) leg Arm bolt position
58" (1,473 mm)
30
–
45"
(762-1,143 mm)
1 1 0
Leg in 3
63" (1,600 mm)
30
–
50"
(762-1,270 mm)
1 1 1
Leg in 2
68" (1,727 mm)
30
–
55"
(762-1,397 mm)
2 0 0
Leg in 1
73" (1,854 mm)
30
–
60"
(762-1,524 mm)
2 0 1
Top plate inside 4
78" (1,981 mm)
30
–
65"
(762-1,651 mm)
2 1 0
Top plate middle 4
83" (2,108 mm)
30
–
70"
(762-1,778 mm)
2 1 1
Top plate outside 4
88" (2,235 mm)
30
–
72" **
(762-1,828.8 mm)
2 2 0
Top plate outside 2
The tool head may be tilted to cut at a 3" (76 mm) larger diameter than what is listed at each mounting
diameter.
*Diameter denotes the location of center of clearance hole in setup foot. It may be adjusted slightly to fit
need. Setup feet may also be flipped 180° for another 2.5" (63.5 mm) diameter adjustment.
**Important: The setup requires an experienced machinist. Machine may need some modifications or
adjustments when machining at these diameters. It is recommended to mount at 83" (2,108 mm) and
tilt the tool head.