Delayed Courtesy Lights
Delayed or dimming courtesy lights interfere with remote arming. If the delay is more than 5
seconds, turn on the
Delayed Courtesy Lights
feature noted on page 10.
Remote Control Operation
REMOTE FUNCTIONS
Function
Icon remote
Word remote
Arm & lock
Lock
Disarm & unlock
UnLock
Trunk release
✱
Opt
Panic
(repeated honks)
HOLD:
HOLD:
Panic
Locate
(short beep)
Panic
Remote valet mode
✱
+
Opt + UnLock
Option #2
✱
+
Opt + Lock
Remote engine start
+
Lock + UnLock
AutoStart/SafeStart
+
Panic + Lock
Window open/vent
+
✱
Panic + Opt
Programmable Features
The Level FOUR comes preprogrammed as noted in
bold
text in the following tables.
Using CliffNet Wizard PRO
The CliffNet Wizard PRO software provides an intuitive access to all installer and end-user
features through a user-friendly, graphical user interface and provides extensive diagnostic
capabilities. See
www.clifforddealer.com
to download a free copy of the program (a #60-509
cable set is required to connect your Windows PC or palmtop to the G4 DataPort).
Programming User-Selectable Features
1. Note the column (across) and row (down) numbers of the feature(s) you wish to program.
2. Turn the ignition to the “ON” position or start the engine.
3. Enter the factory preset valet/programming code of “2” by toggling the valet switch
(located behind the LED assembly) to the left two times, then to the right (LED on).
4. Immediately hold to the left for about 3 seconds until you hear one horn beep and the
LED turns on to confirm the system is in the “Feature Select” position.
5. Select the feature column: Toggle the switch to the right the number of times indicated
for the column. Pause. You will hear the same number of horn beeps, confirming your
selection.
6. Within five seconds, select the feature row: Toggle the switch to the left the number of
times indicated for the row. You’ll hear a beep each time to help you count.
7. If there is a NOTE for the selected feature, perform the actions noted.
8. Pause. You will hear either one or two beeps: two beeps = ON, one beep = OFF.
9. You can select another feature, or you can exit program mode:
a. To select another feature in that same column, repeat step 6 within the next five
seconds (after five seconds, three beeps indicate return to the
“
Feature Select
”
position).
b. To select a different feature column, repeat step 5.
c. To exit program mode, turn the ignition off (you’ll hear three beeps and the LED will
turn off), or wait 60 seconds for the system to automatically exit program mode.
8
10
D:...-922 Level 4 install manual.vp
Wed Aug 04 17:37:19 1999
Color profile: Disabled
Composite Default screen
