background image

TO DIS ARM:

Press button 1 on the master remote control or button 

 on

the companion remote. 

One chirp

 and one indicator light flash

confirms disarming. In addition, the doors will automatically unlock,

the LED will turn off and the interior lights will turn on and stay on

for 30 seconds or until you start the engine, whichever occurs first.

TO ARM OR
DIS ARM SI LENTLY:

By pressing button 3 on the master remote or pressing both the 

 button 

and

 the 

 button on the companion remote, you can

arm or disarm your Concept 600 with all the indications previously

noted 

except

 the chirps.

TO AC TI VATE
THE PANIC 
FEA TURE:

For three seconds, 

continually

 press button 1 on the master remote

or button 

 on the companion remote. The indicator lights

will flash repeatedly and the siren will blare until you press the

button again to turn it off. If the ignition is on (indicating you are

in the car), the doors will lock to prevent an assailant from

entering (note: some vehicles are unable to lock the doors whilst

the ignition is on). If the ignition is off, the doors will unlock,

allowing you to enter immediately without fumbling with your keys.

TO RE MOTELY
OPEN THE BOOT:

If you have the remote boot release option, pressing button 2 on

the master remote or button 

 on the companion remote

whilst the system is disarmed will release the boot latch (see 

Smart 

boot release option 

on page 18 for more information). If you do not

have the boot release option, you may assign this button to activate

one of the other functions noted in column 4 of the 

Ta ble of

User- Selectable Fea tures

 on page 22, or it can be programmed into a

Clifford ACG 2 electric garage door/entry gate opener interface or 

a Concept 100, 300, 400 or 600 system on your other vehicle.

TO RE MOTELY
START THE EN GINE:

Button 4 on the master remote or button 

 on the companion

remote is factory-set to activate the IntelliStart 4* remote engine

starting accessory. If you do not have this option, you may assign

this button to activate one of the other functions noted in column 

4 of the 

Ta ble of User- Selectable Fea tures

 on page 22, or it can be

programmed into a Clifford ACG 2 electric garage door/entry gate

opener interface or a Concept 100, 300, 400 or 600 system on

your other vehicle.

TO AC TI VATE THE
TIMED HEAD LIGHTS:

If you have this option, channel 7 (LevelShift button once, then

button 3) on the master remote or button 

 on the companion

remote will turn on the headlights for any duration you wish

between one second and 4 minutes (the factory setting is 10

seconds; see 

User-selectable

 

features 

on pages 21-22). If you do not

have this option, you may assign this button to activate one of the 

other functions noted in column 4 of the 

Ta ble of User- Selectable

Fea tures

 on page 22, or it can be programmed into a Clifford ACG 2 

electric garage door/entry gate opener interface or a Concept 100,

300, 400 or 600 system on your other vehicle.

8

* This fea ture/ac ces sory is not evalu ated by Thatcham.

REV C UPDATE PAGE: ONLY PAGES 8, 9, 10, 19 and
the back cover change, all other pages same as REV B.

Содержание 600UK




























Отзывы: