background image

Auto matic Win dow Rol lUp

Your Concept 600 has built-in electronics to automatically close two of your vehicle’s

electric windows every time you remotely arm the system (on some European vehicles,

the system can automatically close 

all

 electric windows and the power sunroof with the

addition of a relay). If you wish, an optional Window RollUp Module can be added to

close a second pair of electric windows.

For safety, the windows will roll up only when you actively arm the system with the remote

control; it will not close them if the system AutoArms (see below for more information on

AutoArming). Also for safety reasons, if there is an obstruction in one of the windows

that is preventing complete closure, the built-in Automatic Window RollUp electronics

will automatically halt the window closing.

  Auto mat ic Win dow Rol lUp In stant By pass  

If you wish, you may arm your Concept 600 

without

 causing the system to automatically

close the two windows. This feature comes in handy on hot summer days by allowing you 

to leave one or both windows slightly open for interior ventilation whilst the system

remains armed.

To remotely arm without Automatic Window RollUp, simply turn the vehicle’s ignition

switch to “ON” and then “OFF” rapidly. When you do so, you will hear a single chirp

confirmation (this action also activates the Instant AutoArming Bypass feature described 

below). When you then exit the vehicle and arm with the remote control, the system

will not attempt to close the windows. The system automatically reverts to normal

operation the next time you arm.

AutoArming™

If this feature is enabled and you forget to remotely arm, the system automatically arms

itself 30 seconds 

after

 the vehicle doors are closed. For your convenience, if you re-open

any door(s) within the 30-second countdown, AutoArming restarts the 30-second delay

from the beginning after all doors are closed. Concept 600 has these additional

AutoArming features:

n

AutoArming enable/disable:

If you prefer, you may deactivate or reactivate the

AutoArming feature. See 

User-selectable features

 on pages 21-22.

n

Visual acknowledgment:

Five seconds after you exit the vehicle, close all the

doors and the interior light has turned off, the indicator lights will flash twice to

confirm the AutoArming countdown is progressing; 25 seconds later, the system will

AutoArm.

n

Lock upon AutoArming:

To ensure you can’t accidentally lock your keys inside

the car, the system is factory-set 

not

 to lock the doors upon AutoArming. To change

this setting, see 

User-selectable features

 on pages 21-22. 

n

Instant AutoArming bypass:

Prevents AutoArming when fuelling the vehicle

and other times when you wish to temporarily bypass the AutoArming feature. To

activate Instant AutoArming Bypass, rapidly turn the ignition switch to “ON” then

“OFF.” You will hear a single siren chirp to confirm that the system will not AutoArm.

Your Concept 600 automatically reverts to its normal operating mode when you next

start the engine.

13

Содержание 600UK




























Отзывы: