Ta ble of User- Selectable Fea tures
Feature Select
1 unmarked press
2 unmarked presses
3 unmarked presses
4 unmarked presses
1
✱
press
Add a
master remote
NOTE 1
Chirps: off/loud/quiet
(1/2/3 chirps)
AutoArming: off/on
NOTE 4 — Add a companion remote:
arm/disarm (1 then 2 chirps)
2
✱
presses
NOT USED
NOT USED
Lock upon AutoArming: off/on
NOTE 5 — Add a companion remote:
boot release* (2 chirps)
3
✱
presses
NOT USED
Remote valet mode via channel 9
and buttons
and
✱
: off/on
NOT USED
NOTE 5 — Add a companion remote:
silent arm and disarm (3 chirps)
4
✱
presses
NOT USED
AutoStart**: both off/both on/temp
only/battery only (1/2/3/4 chirps)
FACT: off/on
NOTE 5 — Add a companion remote:
remote engine starting* (4 chirps)
5
✱
presses
AutoLock: off/instant/RPM-
dependent (1/2/3 chirps)
BlackJax anti-carjacking: off/on
NOT USED
NOTE 5 — Add a companion remote:
timed headlight activation** (5 chirps)
6
✱
presses
AutoUnlock: off/on
Clear all remotes
NOTE 2
NOT USED
NOTE 5 — Add a companion remote:
window rolldown/venting* (6 chirps)
7
✱
presses
Reset all features (except remotes
and valet code) to factory settings
Set a new secret
valet/disarming code NOTE 3
NOT USED
NOTE 5 — Add a companion remote:
remote valet mode (7 chirps)
* Re quires an op tional ac ces sory: ask your Author ised Clif ford Dealer about this fea ture.
** Re quires the op tional Clif ford In tel liS tart 4 ac ces sory not evaluated by Thatcham
NOTE 1: Press button 1 of the new MASTER 16-channel remote control. You will hear
one chirp. Press button 1 again. You’ll hear two chirps to confirm the new remote control
has been added.
NOTE 2: You’ll hear two chirps to indicate all remotes have been cleared from memory.
You must now add new/existing remotes with the “Add a new master remote” feature
and/or the “Add a companion remote” feature.
NOTE 3: Immediately press the unmarked button, enter your new code, wait for the two
chirps, then turn off the ignition (you’ll hear 3 chirps to confirm program mode exit). You
MUST now turn the ignition back on and then re-enter your new code. If the LED flashes
on, your new code has been accepted. If the LED does not light, the two codes did not
match and the system has reverted to your previous code.
NOTE 4: This allows you to arm/disarm your system with a new companion remote or any
remote control of a Concept 100, 300, 400 or 600 system on your other vehicle(s). For
instance, to set channel 13 of the other car’s master remote to arm/disarm your Concept
600, select column 4, row 1, then transmit channel 13 (you’ll hear one chirp). Immediately
reselect channel 13 on the remote and transmit it a second time (you will hear a 2-chirp
confirmation). Channel 13 of the other car’s remote will now arm/disarm your Concept 600.
NOTE 5: The features in this column allow you to control your Concept 600 with a new
companion remote or any remote control of a Concept 100, 300, 400 or 600 system on
your other vehicle(s). Just select the function you wish, then transmit the unused channel
on the other remote that you want to use to perform that function (you’ll hear the chirps
noted). NOTE: You must first set a channel on the remote that will arm/disarm the system
(column 4, row 1) before these others will be accepted.
