Your master remote control can command up to 16 different system functions and
options. But instead of putting 16 buttons on the remote control, we made it easy: First,
than the others. Buttons 2, 3 and 4 are the smaller buttons to the right, below and left of
button 1. The
LevelShift
n
To transmit either channel 1, 2, 3 or 4:
Just press either button 1, 2, 3 or 4. For instance,
to transmit channel 3, press button 3. Whilst you
transmit, the LED indicator will flash once every
level 1
.
n
To transmit either channel 5, 6, 7 or 8:
Press the LevelShift button once. This shifts
buttons 1-4 to level 2 (channels 5-8). Then press
the desired button
within the next 7 seconds
. For
instance, to transmit channel 5, press the
LevelShift button once, then press button 1.
Whilst you transmit, you’ll notice that the LED
indicator flashes twice, pauses, flashes twice, etc.: this indicates
level 2.
n
To transmit channel 9, 10, 11 or 12:
Press the LevelShift button twice. This
shifts buttons 1-4 to level 3 (channels 9-12). Then press the corresponding button
within the next 7 seconds. For instance, to transmit channel 10, press the LevelShift
button twice, then press button 2. Whilst you transmit, you’ll notice that the LED
flashes three times, pauses, flashes three times, etc.: this indicates
level 3.
n
To transmit channel 13, 14, 15 or 16:
Press the LevelShift button three times.
This shifts buttons 1-4 to level 4 (channels 13-16). Then press the corresponding
button within the next 7 seconds. For instance, to transmit channel 16, press the LevelShift
button three times, then press button 4. Whilst you transmit, you’ll notice that the
LED flashes four times, pauses, flashes four times, etc.: this indicates
level 4.
NOTE: One sec ond af ter you stop trans mit ting on level 2, 3 or 4 (chan nels
5-16), the re mote con trol auto mati cally re turns to level 1 (chan nels 1-4).
How to use your COMPANION re mote con trol
We made controlling basic system functions even easier with the
companion remote control. For example to arm/disarm and
lock/unlock, just press the button with the lock/unlock symbol:
; to activate the remote boot release option, just press the
button with the boot-open symbol:
. For less frequently used
features, simultaneously pressing a combination of two buttons (as
specified in the following section) will do the job.
Re motely con trol ling your Con cept 600
Each of your two remote controls can command several different functions and options.
TO ARM:
Press button 1 on the master remote control or button
on
the companion remote control. You will hear
two chirps
and the
indicator lights will flash twice. The dashboard LED will flash
repeatedly, your vehicle’s power locks will automatically lock and
the two windows controlled by the
Automatic Window RollUp
feature (see page 13) will close.
7
