background image

Smart Self- Powered Me dal lion Si ren with Digi tal Com Link

This siren has its own built-in back-up battery, so even if a thief cuts all the wires, the

siren will continue to wail. Furthermore, this unique Clifford-designed and manufactured 

siren has all these important additional enhancements:

n

Unbreachable Digital ComLink:

Clifford’s ingenious serial communications link

ensures that — if the system fuse is pulled, or if power to the system is interrupted, or if 

any siren wire is tampered with whilst the system is armed — the siren will instantly

activate for five minutes. However, if the system is disarmed and power is interrupted

for 

authorised

 servicing, the siren remains silent. This eliminates the need for a special

separate shutoff key common to other battery-backed sirens. This ingenious Clifford

feature guards against any possibility of a thief tampering with your system siren.

n

Smart-charging:

Other battery-backed sirens continually draw charging current

from your vehicle’s battery. In time, this can drain the car’s battery. Clifford’s Smart

Self-Powered Medallion Siren only draws charging current whilst the vehicle’s ignition

is on, i.e., whilst you’re driving. This prevents battery drain.

n

Automatic low battery warning:

If at any time the siren’s back-up battery

voltage is very low, the usual arm and disarm chirps will be automatically muted to

alert you of the problem. Once the back-up battery is properly charged, the chirps will

automatically be restored.

n

Remote siren silencing:

If the system is triggered by a non-threatening event, you

can silence the siren without having to remotely disarm and then re-arm. Simply press

button 1 (master remote control) or button 

 (companion remote control) whilst

the siren is sounding. You’ll hear two chirps (the usual armed indication) to confirm

the system has remained armed. If, however, you press this button whilst the siren is

sounding and either the vehicle’s ignition is on or the bonnet, boot or a door is open,

you will instead hear 4 chirps to indicate that this may indeed be a genuine theft

attempt.

n

User-selectable chirp volume:

As shipped from the factory, your system issues

QuietChirp™ acknowledgments. If you prefer, you may select full-volume LoudChirp™ 

acknowledgments. See the 

User-selectable features

 section on pages 21-22.

n

Long-term chirp silencing:

Whenever you wish, you may silence the arm and

disarm chirps until you decide to restore them. Indicator light flashes continue to

provide visual confirmation of remote arming and disarming. See 

User-selectable

features

 on pages 21-22.

n

Remote controlled chirp muting:

Remote chirp muting capabilities are

especially valuable when parking late at night in a quiet residential area or at any other 

time when you want to arm or disarm silently. To arm or disarm silently, simply press

button 3 (master remote control) or simultaneously press buttons 

 and 

(companion remote control) instead of the usual arming/disarming button.

n

Patented automatic noise abatement:

The siren electronics limit alarm

sounding to five 30-second siren duration cycles even if a door is left open in the wake

of an intrusion. This ensures against car battery drain or vehicle towing due to noise

pollution ordinances. Your Concept 600 will then automatically reset itself to monitor

all other triggers and sensor inputs to 

continue

 to provide the utmost possible

protection.

20

Содержание 600UK




























Отзывы: