English
UNITED KINGDOM •
customer service
tel:
020 8247 9300
internet
www.clasohlson.co.uk
postal
10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
1
2
6
5
7
3
4
Ver
. 20190814
Alarm Clock
Art.no 36-7799 Model EM3529-NO RCC
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Product description
Instructions for use
Batteries
1. Remove the battery cover from the back of the clock
and insert 2 × AA/LR6 batteries. Refer to the markings
in the battery compartment to ensure correct polarity.
The backlight will come on for three seconds and a short
audible signal will be emitted when the batteries are inserted
correctly.
2. Refit the battery cover.
Setting the time
1. Press and hold [ SET ] (6) until “24h” flashes.
2. Turn [ SET ] to change the value.
3. Press [ SET ] to confirm each step.
4. Set the following in sequential order:
-
24-hour or 12-hour time format
-
Hours
-
Minutes
Setting the alarm
1. Set [ ON/OFF ] (7) to the
ON
position.
2. Press [ SET ] (6). The hours will then begin to flash.
3. Turn [ SET ] to change the value.
4. Press [ SET ] to confirm the setting.
5. Set the following in sequential order:
-
Hours
-
Minutes
Alarm on/off
Activate a set alarm or deactivate the alarm by setting
the [ ON/OFF ] switch (7) to:
•
ON
. The alarm indicator will appear next to the alarm
symbol (1). The alarm is activated and will sound every day
at the set time.
•
OFF
, the alarm is deactivated. The alarm must be activated
manually if it is to go off at the set time.
The alarm sounds
• The alarm increases gradually in volume in three stages.
• The alarm will cease to sound after one minute if no button
is pushed. The alarm will sound again after 24 hours.
Press:
• [ SNZ/LIGHT ] (3) to start the snooze function. The alarm will
sound again after 5 minutes.
• [ ON/OFF ] (7) to
OFF
to deactivate the alarm. The alarm
must be activated manually if it is to go off at set time.
Display backlight
Press [ SNZ/LIGHT ] (3) once to illuminate the display for 3 se-
conds. The display backlight goes off automatically after ap-
proximately 8 seconds.
Care and maintenance
• Clean the product by wiping it with a damp cloth. Use only
mild cleaning agents, never solvents or corrosive chemicals.
• Whenever the light is not to be used for a long time,
the batteries should be removed and it should be stored in
a dry, dust-free environment, out of children’s reach.
Responsible disposal
1. Alarm: The indicator is shown on the display when the alarm
is activated
2. AM/PM: The respective indicator is shown on the display
when it is AM or PM
3. [ SNZ/LIGHT ] Snooze/display backlight
4. Display
5. Battery cover
6. [ SET ] Sets the clock time and alarm time
7. [ ON/OFF ] Alarm on/off
This symbol indicates that the product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order
to prevent any harm to the environment or
health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling your
product, take it to your local collection facility
or contact the place of purchase. They will
ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Batteries
2 × AA/LR6 (sold separately)
Time format
12/24 h
