manualshive.com logo in svg

Clenergy PV-ezRack SolarRoof Series, Планирование и руководство по установке

Поделиться
Скачать
Clenergy PV-ezRack SolarRoof Series Скачать руководство пользователя страница 10

Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected]  www.clenergy.com.au 

09

page 

of 25

Installation Instruction

4.3 Installation Dimensions

All drawings and dimensions in this Installation Guide are a generic reference only. PV-ezRack

®

 

SolarRoof™ is to be optimized to suit specific conditions for each project and should be 
documented in a construction drawing. 

Major components of PV-ezRack

®

 SolarRoof™ may be provided in section sizes and lengths 

varying from those shown in this guide. The installation process detailed in this instruction guide 
remains the same regardless of changes in component size. 

If you need to do any on-site modifications or alteration of the system please provide marked up 
drawings/sketches for Clenergy’s review, prior to modification, for comment and approval.

5. Installation Instruction

- Assess the number of modules in the vertical direction using the module height plus at  
  least 18mm between modules (please check the installation manual of the solar module 
  manufacturer);
- Assess the Number of modules in the horizontal direction using the module width plus 18 mm 
  (20 mm if using Universal Clamps) between the modules. 

Note: The standard end clamp will also add 20 mm (except for dual end clamps) on each 
side to the space required;

- Assess the horizontal spacing of the Roof Hooks; 
- Assess the vertical spacing of the Roof Hooks = approx. 1⁄2 to 3⁄4 of module height; 
- Always check the installation manual of the PV-Module you use in order to determine the 
  allowed fixing points on the module frame.

Содержание PV-ezRack SolarRoof Series


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды